Uploading Sketch Problem Arduino
avrdude: ser_open(): can't open device "\\.\YOUR COM": Access is denied.
Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
Then you have do a lot of things in this forum
http://forum.arduino.cc/index.php?topic=51489.0
Your device work properly, your connection cable is good, you don't connect any Tx and Rx with other cable, than you still have a problem this is the best solution but you still frustrated :b, it is because
when you install the driver of FTDI, there is still a Virtual Comp like this:
http://forum.arduino.cc/index.php?topic=51489.0
Your device work properly, your connection cable is good, you don't connect any Tx and Rx with other cable, than you still have a problem this is the best solution but you still frustrated :b, it is because
when you install the driver of FTDI, there is still a Virtual Comp like this:
In my case I have USB Serial Converter and USB Serial (COM3), then when u upload a sketch that will happen like this.
But when, In my case I have USB Serial Converter, then I delete the USB Serial (COM3)
when u upload a sketch that will happen like this...
It works !!!
Now, How to delete the Virtual Port ?
Follow this
1. Double Click on FT23R USB UART
2. Select Hardware
Then Do like this picture
« Terbaru
Postingan Lebih Baru
Terlama »
Postingan Lama








I followed the steps but now Arduino doesn't appear in any port.
What is your OS ?
My COM3 port is gone .. so eh.. Help? Win10
Check again, with my step. u have to follow step by step.
I followed the steps exactly and the device is no longer listed under Ports. It is listed under Universal Serial Bus controllers, it is not assigned a COM port and I cannot upload to it. I am using a Pro Mini 3.3V 8MHz, Windows 7
I can't answer it, if you are not using FTDI driver for uploading the pro mini.
Did it finally work for you? I have the same issue.
Yes it worked, if this cannot help u, you can try to downgrade your windows to windows 7 or 8. That's all my suggestion